| 原産地: | 中国(本土) | 銘柄: | FB | モデル番号: | D004 | タイプ: | レーザーの診断装置 | Laser: | Nd:YAG | Wavelength: | 1064nm/532nm | Pulse energy: | 1-1100Mj | Pulse duration: | 10ns | Diameter: | 2-6mm | Cooling system: | Water cooling, wind cooling | Net weight: | 18 KG | Voltage: | 220V 50HZ,110V 60HZ |
包装
| 包装: | アルミボックス |
仕様
2011 portable Q- switched ND YAG Tattoo Removal Laser Machine D004
100% good price+100% high quality+100% sincere service
100% good price+100% high quality+100% sincere price
1. Specification
Laser Nd | YAG |
Wavelength | 1064nm/532nm |
Pulse energy | 1-1100Mj |
Pulse duration | 10ns |
Diameter | 2-6mm |
Cooling system | Water cooling, wind cooling |
Net weight | 18 KG |
Voltage | 220V 50HZ,110V 60HZ |
2. Theory of operating
The Q-switched Nd: YAG laser delivers a specific wavelength light with high energy which is absorbed by the pigment as tattoo and result in a shockwave. The shockwave shatters the pigment particles, releasing them from their encapsulation and breaking them into fragments small enough for removal by the body. Then these tiny particles will be eliminated by the body. This specific wavelength light can only be absorbed by pigment particles, so its no injury to the skin and the normal tissues will occur.
A. For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal.
B. For exogenous pigment: tattoo, eyeliner and eyebrow removal.
C. Skin whitening.
D. Striae gravidarum removal.4. Comparing5. Cautiona. Do not directly look at the hole of the laser gun; otherwise the blindness will be happened.
b.Make sure the stopper must be revolved off before the water injection, and then keep the water flowing normally.
c.Make sure it must be distilled water or purified water when injecting the cooling water intomachine, tap water or mineral water is absolutely forbidden because it will result in water scale when heated, which will cause mechanical error of machine.
d.Make sure to check water circulation and joint between the machine and hand-piece before running machine.
e.The operation should be done when everything is ready. If there are any abnormal sounds, please stop working immediately; and lighten on again after the capacitance being charged up inside machine.
f. Make sure the machine is absolutely discharged before transportation.
This is April Wang. Thanks for your inquiry at any time. Best service is waiting for you!
Trade managee: cn220257150 Web: www.thefirstbeauty.com
