| HB-AFA-II-VC is a CE Certified Large Automatic Film Coater with vacuum chuck designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has an unique driving system to produce smooth coating on all types of materials. The flat vacuum chuck is built in to hold substrate sheet in place, which is particularly useful when coating on thin substrate and making uniform tape casting. One micrometer adjustable applicator is included for immediate use. This machine can be used for research on ceramic tape casting and Li-Ion battery electrode coating. |
| SPECIFICATIONS | |
| Working Voltage | 110V AC or 208 - 240V AC 50/60Hz Single Phase |
| Max. Power Consumption | 350W |
| Traverse Speed | 0 - 100 mm/sec variable |
| Accuracy: 10mm/sec |
| Stroke Length | 10 - 550 mm adjustable by using Adjustable Position Switch |
| Max. Coating Dimensions | 250mm(W) x 550mm(L) |
| Platform | Aluminum alloy flat vacuum chuck |
| Vacuum Chuck Dimensions: 600mm(L) x 300mm(W) x 20mm(H) |
| |
| Film Applicator | One 250 mm width Micrometer Adjustable Film Applicator is included, with adjustable thickness from 0.01 mm - 5 mm |
| Traverse Pusher is included for pushing the doctor blade to ensure constant speed coating |
| Note: Thinnest film can be achieved is > 10 microm |
| |
| Heating Lid (Optional) - | Heating lid is available at extra cost for drying . please selec mode MSK-AFA-II-VC-H from product option bar. |
| MSK-AFA-II-VC-H | Working voltage: 110V or 220V single phase |
| | Max. working power: 1150W |
| | Note: The drying temperature is adjustable by fine-tuning the infinite control which is a device regulates the heating power. It is located on the front of the heating lid and it allows easy & instant power adjustments. With such a heating lid, you can dry the wet slurry after the completion of the coating process. It is more convenient to transfer electrode sheets with fully cured slurrycoating. |
| | Tip: For drying the coated Li-ion battery electrode sheets (usually 80C~100C is required), simply adjust the infinite control to level 5, close the lid and wait for the slurry to be dried. |
| Product Dimensions | 805mm(L) x 430mm(W) x 223mm(H) |
| Vacuum Pump | A 120L/min Oillless Vacuum Pump is included. |
| Compliance | CE certified |
| Warranty | One year limited warranty with lifetime support |
| Application Notes | Rolling is absolutely necessary to ensure good density and adhesion of electrode materials to the current collector substrate after coating. |
| You may need a vacuum oven to dry the films after coating |
| You may need a vaccum mixer to remove air bubbles inside the slurry and to make all coatings uniform. |
| You may need a Slurry Viscosity Tester to make coatings consistent. |
| Net Weight | 30 kg |
| Shipping Dimensions | 48"(L) x 40"(W) x 37"(H) |
| Shipping Weight | 85kg |
