包装

仕様

  ultrasonic doppler fetal detactor  7 inches
 

B.1 Basic parameters 

ECG, RESP, NIBP, SpO2, PR, TEMP, Optional: Printer, IBP, FiCO ultrasonic doppler fetal detactor ultrasonic doppler fetal detactor 2, EtCO2,.

B.2 Average working time without malfunction

   Average working time without malfunction: ≥ 1000 hours.

B.3 Normal working environment

a)    Temperature Range: (5 ~ 40)°C

b)    Relative Humidity: ≤ 80 %

c)    Air pressure range: (86~106)kPa

d)    Power voltag AC: 100 V -240V

e)    Power frequency: 50/60Hz.

g)    Battery: d.c 10.2 V ~ d.c 12.6 V

B.4 Safety requirements and classifications

1. Electric shock type: type I equipment with inside power supply and internal power supply.
2. Electric shock degree: all application parts are BF type, except ECG and TEMP which are CF type.
3. Harmful liquid material proof degree: ordinary equipment (no seal against liquid).
4. Disinfection: follow manufacturer’s recommended methods.
5. Safety on flammable gas: not suitable to use wher flammable gas is present.
6. Input power: no bigger than 80VA.
7. The monitor has applicable
8. The monitor has network, display, printer, and USB ports.
9. Power supply is AC 100V-240V 50/60 Hz
10. The monitor is a continual working system.

B.5 ECG

(HR)heart rate:

a) measurement range: 30 bpm ~ 300 bpm

b)        measurement accuracy: 1 bpm or ±1%, take the bigger one.

Settings and allowable tolerance for HR alarm:
   Upper limit: 60 bpm~ 300bpm,allowable tolerance ±10%
   Lower limit:30 bpm~ 200bpm,allowable tolerance ±10%

HR alarm response time: <12s

ECG noise: ≤ 30μV
ECG frequency response:

Monitoring mode: (0.5 ~ 40)Hz (+0.4dB -3Db)

Diagnostic mode: (0.05 ~ 100)Hz (+0.4dB -3dB)

ECG input loop current: ≤0.1μA.

ECG display sensitivity: Step-type

×1 step   10mm/mV         tolerance less than ±5%
×1/2 step   5mm/mV         tolerance less than ±5%
×1/4 step   2.5mm/mV       tolerance less than ±5%
×2 step   20mm/mV         tolerance less than ±5%

Display sensitivity:

a)         Time shift: initiate at the baseline after 15min's energizing.The shift scope of the baseline is not beyond 5mm after 60min's.

b)        Temperature shift: the scope is from 5°C --40°C.The shifting average of baseline should be no more than 0.5mm/°C.

c)         The shift of waved baseline of supply voltage should be no more than 1mm. The sensitivity changes should be displayed ±10%

d)        The poling voltage at ±300mv is added between positive electrode and N electrode, negative electrode and N electorde. The changes of sensitivity error should be displayed ±5%

Scanning velocity and error

Scanning velocity: 6.25 mm/s, 12.5 mm/s, 25 mm/s, and 50 mm/s.

Scanning velocity error: ±10%.

Input impedance: The impedance between positive electrode and the N electrode, between thecathode and the N electrode is no smaller than 5MΩ.

Module signal suppression ability: ≥89 dB

Time constant: Diagnostic mode ≥3.2 seconds

             Monitoring mode ≥0.3 seconds

B.6 NIBP

Measurement range

a) Adult    Systolic blood pressure(SBP): (5.3 ~ 36.0)kPa,or(40 ~270 )mmHg

Diastolic blood pressure(DBP): (2.7 ~ 26.7)kPa,or(20 ~200 )mmHg

Mean average pressure(MAP): (4.0 ~ 29.3)kPa,or(30 ~220 )mmHg.

b) Pediatric Systolic blood pressure(SBP): (5.3 ~ 24.0)kPa,or(40 ~180)mmHg

Diastolic blood pressure(DBP): (2.0 ~ 21.3)kPa,or(15 ~160)mmHg

Mean average pressure(MAP): (2.7 ~ 22.7)kPa,or(20 ~170)mmHg.

c) Neonate   Systolic blood pressure(SBP): (4.0 ~ 18.7)kPa,or(30 ~140)mmHg

Diastolic blood pressure(DBP): (2.0 ~ 13.3)kPa,or(15 ~100)mmHg

Mean average pressure(MAP): (2.7 ~ 15.3)kPa,or(20 ~115)mmHg.

Measurement accuracy: ±0.4 kPa (3 mmHg) or ±2%,take the bigger one.

Display unit: KPa or mmHg.

B.7 IBP

Measurement range: (- 5.33 ~ + 44.0)kPa,or(-40 ~ + 330 )mmHg

measurement accuracy: 4 % or ± 0.5 kPa,take the bigger one.
display unit: kPa or mmHg are electable.

B.8 RR

Measurement range: (0 ~ 120 )bpm Measurement accuracy: ±1 bpm or ±5 %,take the bigger one.

B.9 TEMP

Measurement range: 25°C~ 45°C

Measurement accuracy: ±0.2°C

Response time: ≤3 min.

B.10 SpO2

Measurement range: 0 %~ 100%

Measurement accuracy: ±2% during 70 %~ 100%, not required during 0 %~ 69%.

B.11 PR

Measurement range: 30 bpm ~ 250bpm

Measurement accuracy: 1 bpm or ±2%. Take the bigger one.

B.12 CO2

Measurement range:

FiCO2 and Et CO2:   (0 ~ 10.0)%

measurement accuracy:

FiCO2 and Et CO2: 0~5% ±0.2%

5.1%~10%±8% of reading

>10% ±10% of reading

Health is passed on here!

INVITATION

Warmly welcome to booth (NO. 2L25 ) of Beijing Fuxinghua Group IN Africa Health 2014(From May 29th to May31st)

お取引の流れ→ (詳細を確認こちらをクリツク！)