製品情報
原産地: 中国(本土) | 銘柄: transv | モデル番号: tt162r |
パワー: Ac12-24v/dc | 形式: pal、 ntsc、 secam | 保証: 1年 |
保護: 建て- 過渡保護 | タイプ: アクティブビデオバラン |
仕様
アクティブビデオバラン建て- 過渡保護伝送信号: pal、 ntsc、 secamce、 rohs指令、 fcc
CCTV UTP active video balun
1,TT162R receives the moving pictures, It is a video receiver active (amplified) device using the unshielded twisted-pair cable.It allows the transmission of real-time monochrome or color video over UTP cable. baseband (composite) signals of any type are supported.
2,The active TT162R is capable of delivering a fully equalized signal to the DVR when used with any Active TRANSVIDEO Receiver, yet is compatible with all of TRANSVIDEO’s passive products for applications under 900M. it can transmit distances up 1800M with another TT152Tfor video control in middle distance.
3,Excellent anti-interference performance;It is a special balanced signal transmission, so it have good capacity of resisting disturbance though a high electrical environment. It can transmit video signal at long distance.It can co-exist in the same cable bundle as telephone, data communication, or low-voltage power circuits.
4, The video transmittal effest is much better then the one usig coaxial cable. After 800m transmission, the picture is same as the one at 10meters on coaxial.
5,Power: 12-24V AC/DC
6,Built-in transient protection with separate ground connection
7,Mini-coax pigtail supports in-camera mounting in most dome cameras;
8,25 frames / sec real-time transmission; Transmission signal: PAL, NTSC, SECAM
1,It have 2LED, one is power(POWER), another is siginal(VIDEO).
2,Chose one pair of the UTP cable connect with the device + and - ports.
3,Connect the CCTV cmera’s BNC to transmetter’s VIDEO IN BNC port.
4,POWER supply the POWER respectively access wiring ends. Do not place the + POWER (VIDEO + - 12VDC) access on so as to avoid the damage of equipment.
5,Protect drain connect to the drain terminal
6,According to dial the code switch Settings, properly set to dial the code switch position, according to the distance to set the switch
7,Insert voltage-stabilizer. Turn on the power.
8,POWER LED lights up, already through means the POWER.
9,VIDEO LED light ,means VIDEO signal has connected.