製品情報
条件: 新しい | 自動等級: 自動 | 原産地: 中国(本土) |
銘柄: アジアスター | モデル番号: yxld2800 | 電圧: 220v |
力(W): 90kw | 次元(L*W*H): 42metersx5.1metersx3meters( 8チャンバー) | 重量: 48トン |
証明: ce | 保証: 1年間 | 提供される売り上げ後のサービス: 利用できる海外サービスセンター |
青: 白 |
包装
包装: 詰まるPP |
仕様
熱風テンター機の両方に使用される天然繊維と化学繊維。 ととニット生地のための両方をwoving。
マシンの使用状況:
Yxld2400 hot air stenter is mainly used for the cotton、 ポリエステル、 ウール、 hemp of setting process for the open width fabrics、 after worked by the machine、 you can get stable size of the fabrics and good hand feeling。
Mainly technical parameters:
Machine working pattern : chains circulation horizontal rotary
Heat setting pattern : hot air circulation
Chains pattern: pitch 60mm、 pin and clamp two optional。
Rail pattern stainless steel rail、 non oil lubrication
Machine standard power: 380v(& plusmn; 5%) 50hz3ph
Control power: 220v、 24v
Applicable steam specification: 36キロ-/cm・sup2; saturated steam
Steam consumption : 100~150kg/hour
Applicable compressed air specification: 0.3- 0.6mpa compressed air without moisture
Maximum temperature of the heating chamber: 220・度; c
Applicable heat source : circulation thermal oil
Circulation oil consumption: 80000-140000kcal/ h& middot; チャンバー( 0.33- 0.6gj)
Main chain driven pattern: right and left chains drive separately
Working width control pattern: working width of each chamber adjust separately
Air delivery pattern of the heating chamber: upper blower chamber and lower blower chamber control air volume seperately。
Pin plate maximum working width: 2400ミリメートル
Heating chamber width: 3000mm/チャンバー
Heating chamber thickness: 150mm
Machincial speed : 5~80m/min
Power of some parts: padder: 12.5キロワット
をガム、 切断、 sucking device 6.74 kw( オプション)
pneumatic edge spreader 3kw
driven device 45 kw
each chamber power: 15.75kw
machine dimension( max) l=42meters( 8 chambers)
W=51meters
H=3meters
Machine weight: ab0ut 48tons
Machine colour: jewelry blue + crystal white
Technical flow and each part brief :
Open width fabrics enter-- width expanding --i nfra red expanding and centering-- two rollers mangle--- tension synchronous control ----- mechanical weft straightner-- lower overfeeding-- screw expanding---- upper overfeeding-- edge spreader-- インフラ- red inspector-- overfeeding pin on-- heat setting--- coolant air-- pin off-- 終了-- plaiter or rolling
もっと多くの写真の私たちのテンター: