| 原産地: | 中国(本土) | 銘柄: | zxm | モデル番号: | ZXM-PE250 | 保証: | 一年 | 条件: | 新しい | 認証: | ce | 次元(L*W*H): | 6 × 1.3 × 1.8メートル | 提供される売り上げ後のサービス: | 利用できるエンジニア機械類を海外に整備するため | その処理系チェンジャー: | 手でまたはによるモータ | 粒状切断: | からnoodelsにパレット | ネジ径: | 250ミリメートルに125ミリメートル | パレット切断: | 周波数インバータ制御 | プラスチック処理: | epe/psp廃棄物 | 出力毎時: | 150〜200キログラム | クラッシャー: | を含む | 完成品: | パレットまたはgranula |
包装
| 包装: | に適し海方法、要件に応じて異なる国 |
EPS/EPE Foam Recycling Machine
EPE FoamWast or Leftovers Recycle Machine is used to convert the EPE foam leftovers or wastes into the Polyethylene pallet for reuse, so that the 100% EPE foam leftovers or EPE foam waste can be recyclable or reusable, to save the cost.
*Delivery Time: 30days
*Packaging: for sea way
Applications:
I. Characteristics Of EPE Foam Sheet
--High resilience and buoyant effect.
--Effective insulating capability.
--Low thermal conductivity.
--Negligent absorption and water permeability.
--Chemical resistant.
--Effective and safe to handle in installation application.
--Non-toxic and environmental friendly
--Fine round closed-cell cellular structure assure.
--Excellent flexibility.
--100% recyclable and reusable.
II. Applications Of EPE Foam Sheet
--External cushioning and packing material.
--Packaging for high-grade goods, industrial electronic parts.
--Construction materials for insulation
--Educational material
--Sport material
--Life vest etc.
Specifications of EPE Foam Sheet Extruding Equipment
M/C Model | EPE-90 | EPE-105 | EPE-120 | EPE-135 | EPE-150 | EPE-170 | EPE-200 |
Screw Dia.(mm) (L/D) | Φ90 (55:1) | Φ105 (55:1) | Φ120 (55:1) | Φ135 (55:1) | Φ150 (55:1) | Φ170 (55:1) | Φ200 (55:1) |
Capacity (kg/hr.) | 50-80 | 80-105 | 120-180 | 160-230 | 200-280 | 330-450 | 600 |
Width(mm) | 1000-1500 | 1000-1500 | 1000-2000 | 1000-2000 | 1000-2000 | 1000-2000 | 1000-2000 |
Thickness(mm) | 0.5-5 | 0.5-6 | 0.5-8 | 1-9 | 1-12 | 2-16 | 25 |
Main motor KW | 37 | 45 | 55 | 90 | 110 | 132 | 220 |
Line speed m/min. | 10-80 | 10-80 | 10-80 | 10-80 | 10-80 | 10-80 | 10-80 |
Foam times | 20-47 | 20-47 | 20-47 | 20-47 | 20-47 | 20-47 | 20-47 |
Density kg/ m3 | 18-40 | 18-40 | 18-40 | 18-40 | 18-40 | 18-40 | 18-40 |
Cooling method | Water cooling and air cooling | ||||||
Install power KW | 90 | 100 | 130 | 150 | 180 | 210 | 260 |
Work power KW | 55% | 55% | 55% | 55% | 55% | 55% | 55% |
Screw RPM | 20-80 | 20-80 | 20-80 | 20-80 | 20-80 | 20-80 | 20-80 |
Dimensions (m) | 22 x 2.3 x 2.2 | 25 x 2.3 x 2.2 | 27 x 2.5 x 2.2 | 28 x 2.5 x 2.2 | 30 x 2.5x 2.2 | 32 x 2.6 x 2.8 | 32 x 2.8 x 2.8 |
Total weight (Ton) | 5.5 | 6 | 9 | 10 | 11 | 15 | 18 |
Components of EPE Foam Extruding Plant
Screw: It is made of the top quality 38CrMoALA azotized steel. Thermal and azotized treatment and special surface plating made the screw with the characteristics of high intensity and long life.
Cylinder: It is made with top quality 38CrMoALA azotized steel. Thermal treatment prevents wearing from long time service.
Material-Feeding Sector: Two ends are connected to the cylinder and the gear box. The raw material is sent to the extruder via it. The user should keep some cooling water in circulation in order to prevent the temperature arising, which will result in pastiness and agglomeration of the raw-material, even block the material-feeding hole.
Main-Motor of Extruder: The main motor is an adjustable AC motor, cooled by air. Main motor is connected to the screw in the main machine via the gear box.
Foaming agent (Butane) Pump: is a high pressure measuring pump. This pump jets the deliquesced butane into cylinder by a high-pressure of 10-15Mpa (100--150Kg/cm).The butane mixes with the melted LDPE in the entrance of the machine cylinder. A non-return valve is equipped in the entrance of butane into the cylinder to insure the melted LDPE will never shoot back in case that the pressure in the cylinder is higher than the butane pressure. This is also to insure production safety.
Anti-Shrinkage (GMS) Agent Pump: sends the heated shrink- resistant agent into cylinder with a pressure of 10-15Mpa (100-150mm/cm).The melted shrinkage resistant agent is mixed with LDPE in the shrinkage resistant agent's entering sector. A non-return valve is equipped in the entering sector to prevent the melted LDPE from shooting back in case that the pressure in the cylinder is higher tha n the shrinkage resistant agent's. This is to insure the production safety.
Die-Head: Melted raw material is extruded from this sector. The raw material started to froth at entering the die-lip. The thickness of the expanded PE sheet depends on the die lip and drawing speed. .
Molding Drum: The width of the expanded PE sheet relies on this sector
Haul-off: The sheets extended by the molding drum should be draught after entering this sector. At this time the drawing speed should keep balanced in order to insure the quality of the sheet material. equipped with a speed-changeable motor so as to timing the drawing speed.
Winder: This part is equipped with length counter to set the sheet's length. It rotates 180 degrees when the winding length of the first roller reaches the set requirements. Then the second roller starts winding.
