原産地: | 中国(本土) | 銘柄: | yeping | モデル番号: | PGL-B | タイプ: | 噴霧乾燥装置 | タイプ: | スプレー乾燥機 | 液体(最小): | 2〜55キログラム/時間 | 液体(max): | 4〜140キログラム/時間 | 流動化容量(最小): | 2〜150 | 流動化容量(max): | 6〜450 | ボリュームの材料容器: | 26〜1600 l | 直径のコンテナ: | 400〜1600ミリメートル | 電源の吸引ファン: | 4.0〜37 kw | アプリケーション: | 粉末 | 認証: | iso9001 |
包装
包装: | 木製ケース |
3 Features
(I) Easy regulation and control, strong adaptability
1. Regulate thickness of materials, speed of main shaft, number of rake arm, style of and sizes of rakes to make drying process be optimal.
2. Each layer of drying plate can be led thermal or cold media individually to heat of cold materials and make temperature control accurately and easily.
3. Dwelling time of materials and be accurately adjusted.
4. Single flowing direction of materials without return flowing and mixing, even drying and stable quality, no re-mixing is needed.
(II) Easy and simple operation
- Start and stop of dryer is quite simple.
- After materials are stopped feeding and conveying, they can be easily exhausted out of the dryer by rakes.
- Careful cleaning and observation can be carried inside the equipment through large-scale viewing window.
(III) Low energy consumption
- Thinner layer of materials, low speed of main shaft, small power and energy needed for conveying system of materials.
- Dry by conducting heat so it has high heating efficiency and low energy consumption.
(IV) Friendly environment, solvent can be retrieved and dust powder discharge can meet requirement.
- Normal pressure style: as low speed of air flow inside the equipment and moisture being high in upper part low in lower part, dust powder could not float to the top of the equipment, so there is almost no dust powder in tail gas discharged from the most discharge port on the top.
- Closed Style: equipped with solvent retrieval device that can retrieve organic solvent easily from most-carrier gas in closed circulation for those subject to burning, explosion and oxidation, and poisonous materials in order for safe operation. Especially suitable for drying of flammable, explosive and poisonous materials.
- Vacuum Style: if the plate dryer is operating under vacuum state, it is particularly suitable for drying of heat sensitive materials.
(V) Easy installation and small occupying area
1. As the dryer is in a whole to leave the factory and to be transported, it is quite easy to install and fix in the location only by hosting.
2. As drying plates are arranged by layers and installed vertically, it takes a small occuping area through drying area is larger.