| 電圧: | 380ボルト | 原産地: | 中国(本土) | 銘柄: | zb | 条件: | 新しい | 重量: | 960キログラム | 力(W): | 4kw | タイプ: | ストレートナ及びカッター | 保証: | 1年 | 認証: | IOS9001 | 提供される売り上げ後のサービス: | 提供される海外サービス無し | 原産地: | 河北、中国 | ブランド名: | zb | 素材: | ステンレス鋼 | 使用のため: | 鋼管切断 | 電圧: | 380ボルト | 電源: | 4kw |
包装
| 包装: | 木製 |
Product usage: maintain, repair, service and retread of steel tube
Product type: brand new
Name: new type full-automatic construction steel tube straightening derusting paint
Model: 48-1221
Application scope: Ø48MM steel tube
Motor power: 4KW
Voltage: 380V
Rotate speed: 8 meters/min
The Max length of straightening steel tube: unlimited
The Min length of straightening steel tube: 1 m
The Max camber of straightening steel tube: 95°
Total weight: 960KG
Features of steel tube straightening derusting paint:
- 1. High speed, high efficiency! It can finish 6 meters per minute. Straightening, derusting and brushing paint will be done at the same time.
- 2. The mothod of 360°single brushing high-speed revolution makes it faster and more cleaner to remove the cement and rust.
- 3. The scope it can straighten is the bending of Φ48 -Φ51(the bending is 0°- 90°). Straightening effect: ≤1°.
- 4. Main motor power: 7.12KW
Weight: 960KG
Dimension(L*W*H):2430*900*1100mm
Main function of the machine:
Straighten the steel pipe/steel bar
Removing the rust on the surface of the steel pipe
Remove sand ,soil on the surface of the steel pipe
Paint the surface of the steel pipe
Main usage of 48 type steel tube straightener:
The machine is suitable for the factory for prefabrication of cement and construction site. Straightening wire rod of the hot rolled round steel bar, and cutting into the required length.
The requirement of the steel bar that needed to be straightened:
1.It couldn’t straighten the steel bar that with bamboo joint and the excircle of the steel bar should be smooth and round.
2.The diameter of the steel bar should be among Φ4-Φ8mm.
3.The material of the steel bar is A3,the intersity limitation is σb400MPa.
4.If the steel bar is not smooth or not round, the diameter of the steel bar will be decreased in the permitted range.
5. For the φ3mm steel bar, onlywithin 4 meters the cut-off machine could be straightened.
