包装

仕様

Double Action ESSE 1000A Airbrush Gun Cutaway Handle

Airbrush Features:

1. Self-centering nozzle, 0.2 or 0.3 nozzle, easy to replace.

2. Fine line and perfect atomization

3. Sensitive Control, instant effect.

4. Adjustable Handle with open window

5. Double action control with comfortable trigger

This professional airbrush gun is not only suitable for professional user but also for beginner. This  model is perfect choice for large area uniform painting of roughly pigmented paints and paintwork facilitated by diameter 0.2 or 0.3mm nozzle and big detachable glass jaw. Double action lever allows precise regulation of paint and air mixture. The screw before the lever and adjusting screw at the end of handle helps you to achieve the ideal paint-flow volume as as you needed. Beautiful Chrome plated body build; solvent resistant seals; rust free needle system; easy to dismantle and clean; smooth trigger; excellent paint air mixture flow; colorful airbrush handles.

Airbrush Specification:

Airbrush Package:

Doube Action Function:
 
Double function airbrush realises the simultaneous regulation of air volume and paint volume with the operating lever: by pressing down the lever you can regulate the airflow, by turning it back(at the same time) you can regulate the paint volume. By activating the control lever downwards, the compressed air flows forwards, out off the needle cap. First by pressing the control lever backwards, the paint comes out of the nozzle and is sprayed on the object due to the air pressure. The more one presses the control lever backwards, the more paint is sprayed. It is recommanded to use a double action airbrush from the beginning. The maximun paint volume can be adjusted at the back by paint volume adjusting screw.

Note:
At the beginning of the spraying process: First start the air, then the paint!
At the end of the spraying process: First take away the paint, then the air!

Airbrush Application:
 
The intelligent solution: The ideal and high-performance device for the airbrush, beginners or pros, for model making, ceramic, pottery, cosmetic, finger nails, helmets, technical illustrations, tanning, tattoos, textile, nailart - studios, working with emulsion paint or simply for airbrushing.

Airbrush Maintenance:

Intermediate cleaning: spray out the paint, dissolve/loosen residue using water and /or a suitable cleaning agent and brushes/cotton buds, spraying it out subsequent to this.

Thorough cleaning (prior to longer working breaks): a. Terminate the compressed air supply. Unscrew the end piece and needle securing nut; b. Pull out the needle and clean with a cloth and cleaning agent. Check the needle tip for deformation; c. Unscrew the needle cap and clean with a cotton bud; d. Remove the nozzle and push any paint residue carefully out of the interior with a fine brush or needle. Check the nozzle and seal for cracks or deformation; e. Insert the nozzle into the air head and screw into position. Press the lever down and insert the needle carefully up to the stop. Screw the needle securing nut and end piece into position.

Further maintenance instructions:
Never immerse the entire instrument in solvent. A little thinned oil should be applied accationally to the lever mechanism. Keep the needle tip and nozzle free of oil and grease, as this can influence the spraying characteristics. The needle, nozzle and seals are components subject to wear and should be replaced when necessary. Nozzle sets and flow cups are available in different sizes to facilitate conversion.

お取引の流れ→ (詳細を確認こちらをクリツク！)