包装

Impregnated thermoplastic stiffener hot melt sheet for shoes Toe Puff ( pinpong sheet)

WP series

Fully elastic thermoplastic TOE-PUFF with excellent bounce back effect and outstanding wear results 
With certificated quality and recommended by SATRA

Types       Thickness            Advice of application

WP 040SS   0.03~0.05mm       very light ladies & casual shoes.

WP 060SS   0.05~0.70mm   very light ladies & casual shoes. 
WP 080SS   0.70~0.90mm    ladies pump, men’s shoes.
WP 100SS   0.90~1.10mm     men & women casual shoes.
Remark: Please take notes the advice of application of above comes from the experiences of all existing clients. Please kindly be chose the most suitable type of material for your shoe models.

Using Method: (All above materials require an interface temperature of 95~100 for bonding & 80-90 for reactivation.)

Cutting & Skiving Process:

Cutting: In diagonal direction as indicated on the materials sheets, for obtain the best lasting result.
Skiving: Skiving the non-coating side. Fine adjusting the inclined plane of bell-knife on skiving M/C with steel bottom roller to avoid wrinkle or X-ray effects caused.
Upper Preparing Process: (With Hot/Cold Pre-Molding System):
Setting hot mold with 110~120, 15~20 sec according to the thickness of upper materials. Setting times of cold mold for 20~25sec, according to the substance and lining. And ready for lasting process.
Lasting Conveyor Process:
Setting heat reactivated system of lasting conveyor on 120-125, 5~7 min. It makes thermoplastic counter reactivating again to obtain the perfect last shape reproduction and retention.

お取引の流れ→ (詳細を確認こちらをクリツク！)