原産地: | 中国(本土) | 銘柄: | グリ | モデル番号: | IAQ-1-VC-S | センサータイプ: | ndirセンサー | 保証: | 送料2年 | 検出器オブジェクト: | co2、voc、温度、rh | アラーム: | 2つのサウンドライトとアラーム | アフターサービス: | 生涯無料テクニカルサポート | 信号出力: | 4-20maまたはrs485 | 表示: | 大型液晶画面 |
包装
包装: | カートン |
Product Description
1 ,Overview:
IAQ-1 wall-mounted CO2 gas detector, is a andvanced infrared, which can continuously detect the concentration of carbon dioxide in operating environment transmitter.
IAQ-1 is natural diffused gas detection methods, sensitive components infrared sensor, with high sensitivity and excellent repeatability; has a large-screen LCD display, live online observation target gas concentration and temperature and humidity values; a time, date and week display; has a two alarm output, exceeds a preset alarm point immediately start sound and light alarm signals and relay control signal; along international standards 4-20mA signal (three-wire system) can directly connect DCS system, the signal is proportional to the measured concentration of gas; way RS485 digital signal or a wireless RF signal and factory PC communication; with soft / hard two calibration methods, without opening the cover to complete calibration.
IAQ-1 can be widely used in factories, offices, warehouses, mines, and other online site environmental monitoring.
2 ,Feature:
2.1,Infrared sensor stable and reliable;
2.2,Large LCD screen and backlight for the display of gas concentration;
2.3,DC9-24V wide range power supply (using the power adapter is connected to AC220V), power can be used;
2.4,Two sound and light alarm, used to display status in time;
2.5,Intelligent design, convenient to be usedonce have poweer;
2.6,Case can be wall to wall, but also flat on the table, easy installation;
2.7,Can detect gas concentrations, temperature and humidity;
2.8,With a way standard 4-20mA (three-wire) current signal and a Way RS485 digital signal output.
Product Name | IAQ1-TVOC Wall-mounted CO2 gas detector | Sensor name |
| |
Product Model | IAQ-1-VC-S | Sensor Model | Infrared CO2 module, semiconductor, TVOC sensor,temperature humidity sensor | |
Input Power | 9-24VDC | Detection object | CO2 | |
Contact capacity | 20-200mA | Detection Principle | Infrared | |
Display | Large LCD screen | Detection method | Diffusion | |
Alarm | Two sound and light alarm | Detection range | Optional | |
Alarm error | ≤±10%Alarm settings | Accuracy | ±5%FS | |
Operating Temperature | -10-40 | Resolution | 1PPM | |
Humidity | 0-90%RH | Warm-up time | 1 Min | |
Pressure range | 860-1060hpa | Responce time |
| |
Signal output | 4-20mA or RS485 | Life | 2 Years | |
Contact capacity | 0.5A/120VACor 1A/24VDC | Zero drift | ≤±2%FS/6h |