原産地: | 中国(本土) | 電圧: | 380ボルト | 適用: | びん | 銘柄: | lones | モデル番号: | LS-B3L | 重量: | 1.0 t | 力(W): | 10kw | 認証: | ce | 処理されるプラスチック: | ペット | 提供される売り上げ後のサービス: | 利用できるエンジニア機械類を海外に整備するため | 打撃の形成のタイプ: | 伸張の打撃の鋳造物 | 保証: | 12ヶ月 | 条件: | 新しい | 次元(L*W*H): | 145 × 75 × 170センチ | 自動: | いいえ | 空洞: | 2 | 最大ボトル: | 3リットル | 容量: | 1500bph |
包装
包装: | 木製ケース |
LS-B3L semi automatic pet blowing machine
1 blower 1 heater 800bph
2 blower 1 heater 1500bph
0.1-2.0L
LS lones semi-automatic blow moulding machine has been improved , designed by CE standard. With microcomputer controlling system, it controls various technical parameter needed more accurately and more steadily. Only one person without special training operates it more easily and more safely. LS-B2000 blow moulding machine is fit to blow carbonated beverage bottles, mineral water bottles, cosmetics bottles and hot-filling bottles,and other PET container .
1. Produce bottle from 0.1L to 3L(2 cavity)
2. Output capacity up to 850 for 0.1L using two-cavity blow mold
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & startup adjustment.
10. Waste rate of finished bottle is less than 0.3%
General Information | LS-B3L one machine and one heater | LS-B3L Two machine and one heater |
Clamping Force | 10T | |
Clamping Stroke | 160mm | |
Max. Stretching Stroke | 360mm | |
Number of Cavities | 2 Cavity | 2 Cavity 2Pcs |
Theoretical Output | 0.01-1.5L:660-880BPH | 0.01-1.5L:1000-1600BPH |
Max .Mould Thickness | 220mm | |
Mould plate size | 470350m | |
Voltage Standard | 380v/3PH/50Hz or special order | |
Total Power(Full Loaded) | 3-10KW | 5-15KW |
Min air compressor | 1.0m3/min 3.0Mpa | 1.6m3/min 3.0Mpa |
Net dimension & Weight (L*W*H) | ||
Blow Molding Machine | 155×65×170cm | 155×65×170cm |
Pre-heater | 180×70×140cm | |
Net Weight | 0.88T | 1.6T |