1. Specification of genset |
Gensets Model | KH-480GF-T |
Prime Power(KW) | 480(600KVA) |
Standby Power(KW) | 528(660KVA) |
Rated Voltage(V) | 480 |
Rated Current(A) | 864 |
Rated Frequency(HZ) | 60 |
Rated Speed (rpm) | 1800 |
Power Factor(COS) | 0.8(lagging) |
Emission standard(mg/m³) | EII |
Electric Efficiency(%) | 36.2-40 |
Thermal Efficiency(%) | 48-50 |
Prime Power(PRP):Prime power is available for an unlimited number of annual hours in variable load application,in accordance with GB/T2820-97;A 10% overload capability is available for a period of 1 hour within a 12-hour of operation. |
Standby Power Rating(ESP):The standby power rating is applicable for supplying emergency power for the duration of a utility power interruption.No overload,utility parallel or negotiated outage operation capability is available at this rating. |
2. Specification of diesel engine |
Engine brand | Cummins |
Engine model | OM12NG12-555GX(based on Cummins KTA38 Series) |
Number of Cylinders | 12 |
Cylinder arrangement | V-Type |
Cycle | Four stroke |
Aspiration | Aspirate/Turbo charger |
Fuel System | Direct Injection |
Bore×Stroke (mm×mm) | 159x159 |
Displacement (Liter) | 37.8 |
Compression Ratio | 9.5:1 |
Speed Governor | Electronic GAC of USA |
Cooling System | Water Cooled |
Total lubrication system capacity (L) | 135 |
Natural Gas Consumption (m3/kw•h) | < 0.3 (based on 36Mj/cube) |
Starting Method | DC24V electrical starting |
3. Specification of alternator |
Alternator brand | Stamford |
Orgin | Wuxi |
Alternator model | HCI544D |
Number of Phase | 3 |
Connecting Type | 3 Phase and 4 Wires |
Number of Bearing | 1 |
Protection Grade | IP23 |
Altitude | ≤1000m |
Exciter Type | Brushless ,Self-exciting, AVR automatic voltage regulating,100% Copper winding wire |
Insulation Class | H |
Telephone Influence Factor (TIF) | ≤50 |
THF | ≤2% |
Voltage Regulation, Steady State | ≤±1% |
Transient State Voltage | ≤-15%~+20% |