Specifications

Category

Automated Winding-Slitting Machine

Applicable Material

PET Film, PC Film, PVC Film, PP Film,   Aluminum Plastic Composite Film, Aluminum Film, Copper Film, Mylar, Nonwoven   Fabric, Tissue Paper, Kraft Paper, and etc.

Max Speed for Winding / Slitting

350 m/min (Depending on kinds of material   applied)

Applicable Width of Axial / Material

500mm ~ 2000mm (Customizable)

Min. Width of Slitting

3mm (Depending on kinds of source   material are applied)

Tolerance of Slitting Width

±0.1mm (Depending on kinds of material   applied)

Applicable Thickness of Material

0.01mm and above (Depending on kinds of   material applied)

Max Applicable Diameter of Coil

800mm (Customizable)

Applicable Inner Diameter of Coil

D = 2” and above (Customizable)

Max Applicable Weight of Material

1500 Kg (Customizable)

Rated Frequency

50Hz & 60Hz

Rated Voltage

220V, 380V, 415V, 440V, 460V, 480V, or   Dual-Voltage (Customizable)

Components

Unwinding Unit

- Central Driven Uncoiling System with   Electromagnetic Brake and Manual Alignment System.

- Auto Alignment System (Optional)

Delivering Unit

- Material is delivered through the   Synchronously Driven Supplying Roller to Synchronously Driven Central   Dividing Roller driven by DOLIN made Inverter Duty Transmission System.

Slitting Unit

- Choices of Razor Cutter or Circular   Cutter with fine-adjustable and moveable cutter mounts.

Rewinding Unit

- Synchronously dual-rollers winding   during central surface slitting, or synchronously single-roller rewinding   during pure rewinding driven by DOLIN made Inverter Duty Transmission System.

- Pneumatic Lifting Device makes work   easier.

Controlling Unit

- Number Displayed Counter with Pre-set   and Two-step Deceleration Function

- Meter for Strain Force of Winding   Material

- Meter for Support Force of Rewinding   Roller

- Separated and Independent controllers   for pneumatic system and electronic components.

Others

- Edge Waste Blower with Expulsion Tube

Accessories

- Upper   & Bottom Circular Cutter Blades

- Razor   Cutter Blade

- Upper   Circular Cutter Mount

- Razor Cutter Mount

- 1mm ~ 50mm Upper Cutter Spacer

- 1mm ~ 50mm Bottom Cutter Spacer

Features

- With Dual-rollers Center Surface   Rewinding Technology, each roller gives stand-alone rolling speed supplied by   Its Individual power motor; therefore, both rollers can rewind synchronously   in different diameter.

- With Vector Control Inverter Drive,   rewinding unit results in high accuracy, high performance, and low noise.

- Both unrolling and rewinding rollers   for source and target coils are integrated with easy lowering system.

- All rollers and axles are calibrated by   Dynamic Balancing Treatment.