製品情報
原産地: 中国(本土) | 銘柄: smartec | モデル番号: Pcm-l02s06-336 |
銅の厚さ: 1オンス | 板厚さ: 0.6mm | 充電電圧: Dc: 8.4v |
最大連続放電電流: 8a | 過充電検出電圧: 4.25±0.025v | 過放電検出電圧: 2.40±0.08v |
電圧電流検出、 過: 200±30mv | 短い保護: カット負荷 | 抵抗: ≤60mΩ |
動作温度範囲: -40〜+85℃ | タイプ: Pcm/bms | サイズ: L40*w18*t3mm |
包装
包装: bmsの中立パッキング |
仕様
Pcm2s7.4v8a/bms1.長いサイクル使用寿命2.smartecブランド名3.ceに合格し/rohsテスト
2S 7.4V 8A Li-ion PCB, 7.4V 8A BMS for battery pack PCM-L02S06-336 Product Description2S 7.4V 8A PCM/BMS
1.Charging voltage:8.4V
2.Max continuous Discharging current 8A
3.Over charge detection voltage 4.25V
Detailed Description
Protection Circuit Module Specifications For 7.4VLi-ion Battery Packs | ||||
Model: PCM-L02S06-336(2S) | ||||
No. | Test item | Criterion | ||
1 | Voltage | Charging voltage | DC:8.4V CC/CV | |
Balance voltage for single cell | 4.20±0.025V | |||
2 | Current | Balance current for single cell | 42±5mA | |
Low Current consumption for single cell | ≤20μA | |||
Maximal continuous charging current | 8A | |||
Maximal continuous Discharging current | 8A | |||
3 | Over charge Protection | Over charge detection voltage | 4.25±0.025V | |
Over charge detection delay time | 0.7S—1.3S | |||
Over charge release voltage | 4.05±0.05V | |||
4 | Over discharge protection | Over discharge detection voltage | 2.40V±0.08V | |
Over discharge detection delay time | 89—167mS | |||
Over discharge release voltage | 3.0±0.1V | |||
5 | Over current protection | Over current detection voltage | 200±30mv | |
Over current detection current | 6±1A | |||
Detection delay time | 8ms—16ms | |||
Release condition | charge up | |||
6 | Short protection | Detection condition | Exterior short circuit | |
Detection delay time | 200-500us | |||
Release condition | Cut load | |||
7 | Resistance | Protection circuitry | ≤60mΩ | |
8 | Temperature | Operating Temperature Range | -40~+85°c | |
Storage Temperature Range | -40~+125°c |