製品情報
| 原産地: 中国(本土) | 銘柄: パワーサンウェイ | モデル番号: swiシリーズ |
| 出力電力: 1 - 200KW | 出力タイプ: シングル/トリプル | 入力電圧: 96v~480v |
| 出力電圧: 220vac±3%/380vac±3% | タイプ: DC/ACインバーター | 出力頻度: 50hz/60hz±0.05hz |
| アプリケーション: 太陽光発電所 | 認証: Ce/rohs/ul/cec規格 | パッキング: 木製ケース |
| コラル: 白 |
包装
| 包装: 標準的な輸出カートンのパッキング、 抗- 湿気や水。 プロの梱包を確実にしに商品が到着しましたあなたは良い形で |
仕様
工業用グリッドソーラーインバータオフ5kw~250kwul/rohs/ce/cec第五承認された三菱ipm電源モジュール3年保証
Pure sine wave pv solar power system solar charging inverter 70kw
1. Introduction of Hefei Sunway Power Co.,Ltd
Hefei Sunway Power Co.,Ltd was established on 2008, we have more than 10 years experience in solar controller, wind solar hybrid controller, off grid inverter and other PV products. From now, we can supply high quality goods for our customers
2. Technical Features:
- Using the fifth efficient IPM power module from Mitsubishi with stable performance and it has long service life
- Adopts new magnetism material, largely reduce machine consumption, making efficiency up to 98%.
- Adopts black pure aluminum radiator, which confirms the best radiating performance.
- Low Frequency Transformer, which ensures that inverter has high efficiency and low no-load loss.
- Pure sine wave output, has higher efficiency and higher capability of driving load.
- LCD display, Small size, high efficiency, easy installation.
- European CE (EMC and LVD) Certificate and Australian CEC listed.
- 3 years warranty and whole life maintenance service
3. Datasheet of inverter
- SWI-5000/SWI-6000
| Model | SWI-5000 | SWI-6000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 96V | 192V | 96V | 192V |
| Input rated current(A) | 52A | 26A | 62.5A | 31A | |
| AC output | Rated AC output power | 30KW | |||
| AC output wave form | Pure sine wave | ||||
| Phases | Single-Phase(2 wire and ground)/Three-phase(4 wire and ground) | ||||
| Output rated vol. | 220VAC±3%/380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 23A(220V) | 26A(380V) | 27A(220V) | 31.2A(380V) | |
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-10KW/SWI-15KW
| Model | SWI-10000 | SWI-15000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 96V | 192V | 192V | 220V |
| Input rated current(A) | 62.5A | 31A | 36.5A | 31.8A | |
| AC output | Rated AC output power | 10KW | 15KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Single-Phase(2 wire and ground)/Three-phase(4 wire and ground) | ||||
| Output rated vol. | 220VAC±3%/380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 45.5A(220V) | 26A(380V) | 68A(220V) | 39A(380V) | |
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-20KW/SWI-25KW
| Model | SWI-20000 | SWI-25000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 192V | 240V | 220V | 240V |
| Input rated current(A) | 104A | 83A | 114A | 104A | |
| AC output | Rated AC output power | 20KW | 25KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Single-Phase(2 wire and ground)/Three-phase(4 wire and ground) | ||||
| Output rated vol. | 220VAC±3%/380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 91A(220V) | 52.6A(380V) | 114A(220V) | 65.7A(380V) | |
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-30KW/SWI-35KW
| Model | SWI-30000 | SWI-35000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 240V | 360V | 300V | 360V |
| Input rated current(A) | 125A | 83A | 116.6A | 97A | |
| AC output | Rated AC output power | 30KW | 35KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Single-Phase(2 wire and ground)/Three-phase(4 wire and ground) | ||||
| Output rated vol. | 220VAC±3%/380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 136A(220V) | 79A(380V) | 159A(220V) | 92A(380V) | |
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-40K/SWI-50KW
| Model | SWI-40000 | SWI-50000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 300V | 360V | 300V | 360V |
| Input rated current(A) | 133A | 111A | 166.6A | 138.8A | |
| AC output | Rated AC output power | 40KW | 50KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Three-phase(4 wire and ground) | ||||
| Output rated vol. | 380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 105A | 131.5A | |||
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-60KW/SWI-70KW
| Model | SWI-60000 | SWI-70000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 360V | 480V | 360V | 480V |
| Input rated current(A) | 166.6A | 125A | 194A | 145.8A | |
| AC output | Rated AC output power | 60KW | 70KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Three-phase(4 wire and ground) | ||||
| Output rated vol. | 380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 158A | 184A | |||
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-80KW/SWI-90KW
| Model | SWI-80000 | SWI-90000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 360V | 480V | 360V | 480V |
| Input rated current(A) | 222A | 166.6A | 250A | 187.5A | |
| AC output | Rated AC output power | 80KW | 90KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Three-phase(4 wire and ground) | ||||
| Output rated vol. | 380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 210A | 236.8A | |||
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-100KW/SWI-150KW
| Model | SWI-100000 | SWI-150000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 380V | 480V | 380V | 480V |
| Input rated current(A) | 263A | 208A | 394A | 312.5A | |
| AC output | Rated AC output power | 100KW | 150KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Three-phase(4 wire and ground) | ||||
| Output rated vol. | 380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 263A | 394A | |||
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
- SWI-200KW/SWI-250KW
| Model | SWI-200000 | SWI-250000 | |||
| Isolation | Low Frequency Transformer | ||||
| DC Input | Input rated vol.(VDC) | 380V | 480V | 380V | 480V |
| Input rated current(A) | 526A | 417A | 658A | 520.8A | |
| AC output | Rated AC output power | 200KW | 250KW | ||
| AC output wave form | Pure sine wave | ||||
| Phases | Three-phase(4 wire and ground) | ||||
| Output rated vol. | 380VAC±3% | ||||
| Output Frequency | 50Hz/60Hz±0.05Hz | ||||
| Output rated current(A) | 526A | 658A | |||
| Power Factor(PF) | 0.9 | ||||
| Overload Ability | 150%, 10s | ||||
| Efficiency | ≥90%~98% | ||||
| Waveform distortion rate(THD) | <3% linear load | ||||
| Crest Factor(CF) | 3:1 | ||||
| Structure | Display | LCD | |||
| Electrical insulation properties | 2500vac, 1Minute | ||||
| Ambient Temp | -15~+55°c | ||||
| Using environment Humidity | 0~90%, No condensation | ||||
| Protection | input reverse polarity, under voltage, over voltage, output overr current, short circuit, over heating, etc. | ||||
| Cooling method | Fan cooling | ||||
| Noise | ≤40dB | ||||
| Protection grade | IP20(Indoor) | ||||
| Using altitude | ≤2000M | ||||
| CE standard | EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000 | ||||
4. Pictures of Industrial solar inverter
6. Contact Information
.jpg)
