製品情報
鋼鉄等級: Tool Steel 718/DIN 1.2738/P20+Ni Plastic Mould Steel | 標準: AISI, ASTM, BS, DIN, GB, JIS | 次元: 10--1000mm |
原産地: 中国(本土) | 銘柄: YT | モデル番号: Tool Steel 718/DIN 1.2738/P20+Ni Plastic Mould Steel |
技術: つや出し | 適用: 用具の棒鋼 | 合金またはない: 合金はある |
特別な使用: 型の鋼鉄 | タイプ: 合金の棒鋼 | Tool Steel 718/DIN 1.2738/P20+Ni: Tool Steel 718/DIN 1.2738/P20+Ni Plastic Mould Steel |
包装
包装: as cutomer requested |
Tool Steel 718/DIN 1.2738/P20+Ni Plastic Mould Steel
1. 1.2738 flat bar Chemical composition:(%)
C | Si | Mn | S | P | Cr | Mo | Ni |
0.28~0.40 | 0.28~0.80 | 0.60~1.00 | ≤0.03 | ≤0.03 | 1.40~2.00 | 0.30~0.55 | 0.85~1.20 |
2. 1.2738 Smelting process: EAF+LF+VD+ESR
3. 1.2738 Size:
Round | Diameter | Length | |
10mm~300mm | 2000mm~6000mm | ||
Steel plate | Thickness | Width | Length |
20~400mm | 205~1000mm | 2000mm~6000mm |
4. 1.2738 Delivered Condition :
Hot rolled or forged, EAFor ESR material Black or machined surface, Annealed hardness: HBS≤235, Hardened hardness: HRC=28~35
5. 1.2738 characteristics: Smelted by using vacuum degassing method, so that the steel quality is more purified.
Has superior mirror polishing property.
Good etching workability and EDM spark workability.
Delivered in pre-hardened state; allowable for direct mold cutting without further heat treatment.
Distress annealing and surface nitriding treatment, with very slight change in size and hardness
6. 1.2738 Applications:
Injection die, extrusion die, blowing die etc. application to hot-plastic forming have good nitridting performance; nitriding treatment can significantly the die performance;
they also are often used in important mechanical parts.