製品情報
| タイプ: 懸濁液ばね | 車は作る: 日野 | OE NO。: 49710-2222 |
| 原産地: 中国(本土) | 銘柄: VKNTECH | モデル番号: 1S 0500 |
| 価格条件: FOB広州 | サンプル: 可用 | 支払条件: T/T |
| ディレクトリ: 懸垂装置 | 種類: 空気バネ | 材料: タイからゴム |
| 操作: ガス充填 | モデル: 日野 | ロゴ: VKNTECH または顧客のロゴ |
| サービス: ラベルを提供する |
包装
| 包装: 1.使用レベルK-K標準カートン; 2.カートンごとの50個; 3.2000-3000約20フィートコンテナ |
仕様
1.日野用エアスプリング497102222 2.パッキング：カートンごとの50個 3.パレットあたり200個 4.重量：1.0キロ 5.証明書：ISO-9001-2008
- 温馨提示
Maintenance of the air springs, Vehicle Check-List
- Check the air lines and devices of leakage and that they turns freely.
- Check the bellows bearing for damage, correct fastening, deformation, sharp edges.
- Check the shock absorbers for operation and impermeability as well as tightness and bearing.
- Periodically, check nuts and bolts for proper torque. For specific recommendations see manufacturer's manual.
- Check axle suspension, trailing arms and rods for wear.
- Check height control valve to see that it is functioning properly. A properly maintained valve will save unneeded maintenance expense.
- Routine inspection of all of the above according to manufacturer's instructions, will extend the life of your vehicle and reduce your overall maintenance expense.
Air Spring Installation
- Before you start installing air springs, make sure you have all the necessary tools and equipment to perform the repair safely.
- Familiarize yourself with the suspension on which you are performing the repair by reviewing the manufacturers service guide.
- If you are in doubt ab0ut something, ask for assistance from a qualified suspension specialist, the suspension manufacturer or the air spring manufacturer; This can save you a lot of time and aggravation later in the job.
imp0rtant tips to remember when installing a new unit
- Check levelling valve, 1inkage and transmission parts for wear and damage and if necessary replac the damaged parts.
- Check that the shock absorber for leakages and take a shock absorber test. A defective shock absorber must be replaced.
- Once the air lines are disconnected, check their entire length for cracks or other damage. replac worn parts.
- With the air spring removed, other parts of the air suspension become more accessible. Check for wear or damage of the fra-me hangers, trailing arm bushings, torque rods, the trailing arms and the air spring mounts. When it is necessary, also replac parts.
- Check bearing for air spring bellow for external damage, deformation, sharp edges and correct fastening.
- Before installing the new unit, clean the air spring mounting plates to ensure proper attachment to the suspension.
- Always use new attaching bolts for the installation and observe the tightening torques. Never use old bolts, because these can fall out.
- Check the 1inkage of the levelling valve to see that it is functioning properly. Under load, the 1inkage should move from the neutral position up to the intake position. This lets air into the springs, which brings the arm back to the neutral position. This lets air into the springs, which brings the arm back to the neutral position. That opens the exhaust valve, allowing air to escape until the arm returns to the neutral position. Then check the driving level.
