• エンジニアリング・建設機械クレーン-タワークレーン
    商品番号: 13279026
    仕入れる商品へのお問い合わせについて、
    お電話の場合:スタッフに商品番号をお伝えください。
    商品の詳細

    適用: すべての種類の建設 原産地: 中国(本土) 銘柄: yujie
    モデル番号: QTZ-63 スパン: 120メートル/120メートル/150メートル/150メートル/150メートル 評価される積載量: 5 t、6 t、8 t、10 t、12 t
    最高。 持ち上がる負荷: 5 t、6 t、8 t、10 t、12 t 認証: ce、iso、bv、sgs 提供される売り上げ後のサービス: 利用できるエンジニア機械類を海外に整備するため
    評価される持ち上がる時: 500KN。m/630KN。m/800KN。m/1000KN。m/1200KN。m 特徴: タワークレーン 保証: 一年
    条件: 新しい 最高。 持ち上がる高さ: 120メートル/120メートル/150メートル/150メートル/150メートル 色: に応じて顧客のrequements

    包装

    包装: 標準パッケージが必要な場合は特別なパッケージ、 あなたの要求として我々が行うことができ

     

    engineering & construction machinery cranes

     

      The structure characteristics of hoist boom

     

    Pitch luffing jib tower cranes relies on hoist boom lift unrealized amplitude, its advantage is: can give full play to the effective height of hoist boom of, simple structure, is limited in the biggest drawback is that the minimum amplitude of 30% or so, can't completely close to the tower, when amplitude load with crane boom lift, can't load range.
    Car luffing jib of tower crane is to rely on horizontal jib track installed on the car walks the realization of amplitude, its advantage is: wide range, load the car drove up to the tower, can load amplitude, the disadvantage is that: the lift arm force is complex, the structure of the demand is high, and the boom and the car must be in the upper buildings, towers installation height is 15-20 meters higher than building roof.

     

    The tower structure rotary way

     

    Rotary tower crane slewing bearing, balance weight under the major institutions, etc are all installed in the bottom, its advantage is: the less moment tower, low center of gravity, good stability, easy installation and maintenance, the disadvantage is that higher requirements for slewing bearing, installation height is limited.
    Rotary tower crane slewing bearing, balance weight, major institutions are set at the top, its advantage is because the towers are not turning, can simplify the structure of the tower bottom and top section is convenient. The disadvantage is that: when building over the tower height, because of the influence of the balance arm, limit tower crane slewing, at the same time high center of gravity, wind pressure increases, the weight increase, so the total weight increase.

     

     Type of Tower Crane   QTZ60 Series 
        QTZ63 (5013)QTZ63P (5010)QTZ63P (5011)
     Metric Lifting Moment (KN.m)   630 
     Wokring Radium (m)  505050
     Hoisting Capacity (T)  1.3-6.01.0-5.01.1-5.0
    Hoisting Independent Stationary (m) 393232
    Height Attached Stationary (m) 120120120
    Hoisting 2 Fall 75/38/750.8/25.4/950.8/25.4/9
    Speed 4 Fall 37.5/18.5/3.525.4/12/4.525.4/12/4.5
     Slewing Speed (r/min)  0-0.60-0.640-0.64
     Trolley Travel Speed (m/min)  38/1938/1938/19
     Section of Tower Mast (mm)  160016001600160016001600
           
     Material of Main Tower Mast Section (mm)  ∠160160x16∠160160x14∠160160x14
           
    Gib Upper Branch Seamless Steel Pipe Square TubeSquare Tube
      Lower Branch Square TubeSquare TubeSquare Tube

      エンジニアリング・建設機械クレーン仕入れ・メーカー・工場 エンジニアリング・建設機械クレーン仕入れ・メーカー・工場 エンジニアリング・建設機械クレーン仕入れ・メーカー・工場 エンジニアリング・建設機械クレーン仕入れ・メーカー・工場 エンジニアリング・建設機械クレーン仕入れ・メーカー・工場 エンジニアリング・建設機械クレーン

     

     

     

     

     

    エンジニアリング・建設機械クレーン-タワークレーン _タワークレーン_クレーン_工学及び構造機械類_機械_仕入れ_問屋・仕入れ・卸・卸売り
    その他の製品


    line で相談する
    で相談する