包装

BraGuard

innovation of the century

Brassieres, especially sponge-padded and wired models, are distorted crushed under the weight of other

things in wardrobes, on hangers or in drawers or while handling them in bags, suitcases and other similar

luggage.

Although it is recommended to place in a box during personal handling, this solution causes a loss of

volume in suitcases and other similar luggage.

Another similar and more important problem is related to the washing of the brassieres.

Brassieres reinforced with sponge and similar materials are crushed by other garments during washing in a

washing machine and completely distorted due to centrifugal effect.

Therefore, users must wash their brassieres by hand and any satisfactory cleanliness and hygiene cannot

be achieved in this application which causes a loss of time and energy.

The design provides a decisive result in ensuring that brassieres may be washed in washing machines,

keeping them in wardrobes and drawers and handling them in bags, suitcases and other similar luggage

without distortion.

The design is a complete innovation with such properties as the purpose of use, widespread problem for

which it brings a solution, versatility, etc.

It is a design which eliminates the necessity to hand-wash brassieres and which extends their economic life

by ensuring them to be reliably washed in a washing machine and preventing them from being crushed and

distorted under other garments while keeping them in wardrobes and drawers or on hangers and handling

them in bags, suitcases and other similar luggage and which makes significant contributions through its

environmental impacts which shall be described below.

The reason why some products which have been previously produced and launched for sale in the world

failed to really satisfy the users is that the common characteristic of such products were that brassieres

were produced in the form of a ball which did not fit in their actual structure and that it allowed the

brassieres to freely move in such ball.

As a matter of fact, the basic problem in protecting brassieres is not related to the washing of those

brassieres which do not have any infills of sponge and similar nature in the cups and which are defined as

sports type.

Principal purpose is to prevent the distortion of the cups of brassieres which are reinforced to harden with

sponge and similar infills.

As known, brassieres do not have the form of a full bow or a full dome but the whole of curves comprised of

bows at different angles.

In case this structure is not strictly complied with, the resulting product fails to protect the brassieres, but on

the contrary, causes them to wear out more due to internal frictions.

Further, those suggestions which cause excessive volumetric increases while taking in the product are not

useful and rational while handling them in suitcases and other similar luggage.

Our product has a design which does not cause any volumetric increases but fully fits in the structure of

brassieres and completely grabs and protects them.

The product has been designed for use by women.

The fact that women wash their brassieres which they buy for such prices which may not be considered

reasonable so that they are not distorted in washing machines seems to be very primitive, considering it in

terms of the point wher technology has reached.

Beside loss of time and energy caused by hand-washing the clothing, problems are encountered in

ensuring adequate cleanliness and removing detergents from the brassieres.

In trips, women either support the brassieres with other things (such as stockings) or carry them in a

separate box in order to prevent them from being crushed under the other clothing and this causes serious

loss of volume.

It is easy and practical to use.

A very important aspect in terms of ease of production and use is that it has been designed and produced in

a single size which is compatible with all the sizes from the smallest to the biggest, reasoning one size fits

all. In this way, the difficulty of the end reseller to keep inventories of different sizes and the problem of the

end user not to be able to find the proper size have been eliminated.

Inventor, Registered Design, Patent and Trade-Mark owner Mrs. Buket onder is manufacturing BraGuard

since 2008.

At the moment, BraGuard is selling in Turkish market.

Also exporting to Cyprus, Iran,Croatia...

www.braguard.com/ENG_index.html

お取引の流れ→ (詳細を確認こちらをクリツク！)