| 原産地: | 中国(本土) | 銘柄: | ln | モデル番号: | ln | 条件: | 新しい | 使用法: | 廃油リサイクル精錬機、廃油蒸留機 | 名前: | 廃油リサイクル精錬機、廃油蒸留機 | 証明書: | ce、iso9001 | 原料: | タイヤ油、プラスチック油、廃エンジンオイル、潤滑油、ディーゼル油 | ボイラーmetalplate: | Q245R/Q345R | 環境: | 緑と無公害 | コンテナ: | ワンhqとワンfr | 容量: | 3トン5トン10トン | 圧力: | 負圧 | マシンライフ: | 5-10年 | オイル: | 良いグレード |
包装
| 包装: | 海パッキング: one hqとワンfr |
List for Waste Oil Refining equipment fitting
1. 10 cubic vertical host processing reboiler
2. Waste gas purification recovery system
3. Dust removal system
4. Cooling system
5. Heat interchanger
6. Heavy oil drainage system
7. Oil gas condenser system
8. 3 cubic water-oil separation pot
9. Adjusts the oil pot
10. Second-level vertical filter
11. Central electric control
Mail points about the distillation machine
No. | Distillation machine project | ||
Equipment Model | CL-3 | CL-5 | |
1 | raw materials | waste oil | waste oil |
2 | Structure | Horizontal Rotation | Horizontal fixed |
3 | 24 hours volume | 3 tons | 5tons |
4 | 24-hour oil | 2.4tons oil | 4tons OIL |
5 | Work pressure | Normal pressure | Normal pressure |
6 | Host speed | 2/3minutes | 2/3 minutes |
7 | equipped power: | 7.5kw | 7.5kw |
8 | Cooling | cold water | cold water |
9 | Installation | base | base |
10 | Noise dB (A) | ≤ 85 | ≤ 85 |
The technique parameters comparation of the diesel oil and the mixed oil with the 0# national standard diesel
Items | Diesel oil (after distillation) | Tyre oil from pyrolysis machine | 0# national standard diesle |
Oxidation stability | 2.0 | 1.5 | 2.5 |
Sulfur content (%) | 0.003 | 0.005 | 0.05 |
10% residuecarbon content( %) | 0.25 | 0.25 | 0.3 |
Ash content (%) | 0.016 | 0.1 | 0.01 |
Copper corrosion grade | 1.1 | 1.1 | 1 |
Moisture content (%) | - | 1 | - |
Mechanical impurities | none | none | none |
Density | 0.85 | 0.88 | 0.83-0.87 |
Freezing Point /°C | -10 | -5 | 0 |
Flash point)/°C | 45 | 40 | 55 |
Kinematic viscosity | 3.5 | 5.0 | 3.0-8.0 |
Combustion value | 9500 | 10000 | 8500 |
Chromaticity | 1.2 | 4.5 | ≤3.5 |
Cetane index | 43 | 38 | 46 |
Product and industry that the oil-refining processor suit.
1. Crude oil refined from scrap plastic, scrap rubber…
2. Used oil. For instance: Waste diesel oil machine oil, waste oil, waste diesel oil and so on .
3. Waste component-wash oil
Main technical characteristic
1.This achievement essential equipment adopts the decompression; catalyzed split craft and the product chemistry extract technology.
2.Provides the environmental protection equipment is perfect. For instance waste gas burner and smoke dust removal room.
3.Adopts the simple chemistry method, has solved the product color and the unusual smell.
4.The oil extraction rate of the pure crude oil is not lower than 80%
5.This equipment design is reasonable, manufacture craft is advanced, high automatically, and the complete safety equipment .
6. Versatility
The technical process
Pull the crude oil to be deep processed into reboiler by oil pump, catalyze, and heated under decompressing state, distillate oil vapor, then through condenser, the liquefiable phase condensed to finished oil. The unliquefiable ones come through gas system to Stove Furnace to be burnt down.
Environment Protective
Dispose waste gas, liquid, and residua in the process:
1. Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels.
2.Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). Counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)
3. Waste solid
There are some solid residua left after scrap plastic have been catalyst splitting. Its weight may be 5%--10% of raw material. And the main parts is Asphalt, which could be sale in the market.
.jpg)
