製品情報
タイプ: 毛管管 | 適用: オイルクーラーの管 | 指定: Cupro-nickel 90/10 |
外の直径: 6mm-60 mm | 等級: 70/30 | 厚さ: 1 mm |
長さ: 9000mm | 合金またはない: 合金はある | 最終的な強さ(≥ MPa): as per standard |
延長(≥ %): as per standard | 壁の厚さ: 0.90 - 2.50 | 外部直径: 8mm - 60 mm |
モデル番号: metaLCO | 原産地: インド |
包装
包装: Wooden Case Fumigated |
仕様
C70600 ASTM B 111 C 70600/ASME SB 111 C 70600/BS 2871 part 3 CN 102/EN 12451 CuNi10 Fe 1 Mn/NFA51 102 CuNi10 Fe1Mn/JIS H 3300 C
"Copper Nickle"( 90/10 Copper Nickel tubes )
"ASTM B 111 C 70600/ASME SB 111 C 70600/BS 2871 part 3 CN 102/EN 12451 CuNi10 Fe 1 Mn/NFA51 102 CuNi10 Fe1Mn/JIS H 3300 C 7060/"
90/10 Copper Nickel tubes:-
We are reckoned amongst the trusted manufacturers and exporters of a wide range of 90/10 Copper Nickel Tubes. Known for their flexibility, high corrosion resistance, superior tensile strength, trouble free installation and maintenance, these are in demand in different industries. To ensure complete client satisfaction, the entire array of 90/10 Copper Nickel Tubes is examined thoroughly on standard quality parameters before final delivery.
Send Enquiry
70/30 Copper Nickel:-
Backed by latest technologies and dexterous workforce, we are able to manufacture, supply and export an impeccable gamut of 70/30 Copper Nickel Tubes. These are machined in line with the set industry standards using qualitative raw materials that are sourced from authentic vendors of the domain. Our 70/30 Copper Nickel Tubes are sturdy in construction, dimensionally accurate, corrosion resistant, easy to install and maintenance free. Available in different standard specifications, the tubes can also be customized as per the clients' specifications at nominal prices.
Send Enquiry
Technical Specifications
BS 2871 PART III/72 CN 102 & 07 EQUIVALENT SPEC. ASTMB C70600 & 71500
Chemical Requirements | C70600 | C71500 |
Copper | Remainder | Remainder |
Iron | 1.0 to 2.0% | 0.4 to 1.0% |
Nickel | 10 to 11% | 30 to 32% |
Manganese | 0.5 to 1.0% | 0.5 to 1.5% |
Total Imp. | 0.30% max. | 0.30% max. |
Physical Properties | ||||
Condition | T.S. Kg/mm2 | EL% Min | T.S. Kg/mm2 | EL% Min |
Annealed (O) | 35 | 35% | 37.5-46 | 30% |
As manufactured (M) | 44 min | - | 51 min | - |
- Drift Test
- Hydraulic Test
- Microstructure
- Eddy Current Optional
one of the leading manufacturers and exporters of Copper & Copper alloy tubes all grades.
| ||
To avoided the risk of deposit attack, it is generally recommended to never operate at water velocities below about 0,8-1 m/s (2,5-3,5 ft/s). 90/10 Cupro Nickel can also be used, with appropriately reduced flow velocity, in contact with water containing some sulphides or suspended solids. It is also often selected for its good mechanical properties, both at room and relatively elevated temperatures. | ||
|