製品情報
原産地: 中国(本土) | 銘柄: Saitong | モデル番号: ST-FB |
材料: ポリウレタン | 厚さ: 1-150mm | サイズ: 5003000mm、10004000mm |
色: 要求される自然な透明または | 硬度: 40-90 (海岸A) | 密度: 1.12-1.25g/cm3 |
引張強さ: 25-55Mpa | 破損強さ: 85-155KN/M | 延長: 450-650% |
包装
包装: パレット、顧客の要求に従う木の場合または。 |
仕様
1.Abrasion抵抗2.Oilおよび支払能力がある抵抗3.Hardness: 40-90 (海岸A) 4.Thickness: 1-150mmの5.Tear強さ: >85KN/M
Descri-ption ofポリウレタンプロダクト
1. Polyurethane is a unique engineering material that offers the elasticity of rubber combined with the toughness and durability ofの金属。 ポリウレタンは非常に広い硬度の範囲(懸命のボーリング球に柔らかい消す物)およびさまざまな利点で利用できる(次)としてので、ゴム、プラスチックを取り替えることができ、ローラー、スリーブ軸受け、クッション、反押すことおよび重負荷の金属は鋳造物装置、鉄および鋼鉄工場、製陶術の工場、電子工学、油田、鉱山、構造でも、それ等使用される分ける。
2。 私達のプロダクトは普通MDI、HDIのポリエーテル、ポリエステルに基づくPPG-TDI-MOCAシステムであり、ブロックとしてpolycaprolactoneは、いろいろ適用可能性および利点がある
3. Theプロダクトは顧客の条件のinto various標準外パネルに従って再処理、rod. Weはまたスクリーン、ポリウレタンプロダクトのscraper etc.の の利点特別形プロダクトを、シールのような
、
tube製造、できる
1. Abrasion resistance
2. Oil and solvent resistance
3. Load bearing capacity
4. Mechanical strength
5. Weather resistance
6. Heat and cold resistance
7. Noise reduction performance
8. Shock absorption performance
9. Electrical insulation properties
Size list of polyurethane panelのand rod
名前 | Model | サイズ (mm) width X 長さ | 連続 数 |
Thickness (mm)
|
Coil panel | ST-JB | 5003000 | A | 1----------18 |
10004000 | B | 1----------18 | ||
13004000 | C | 1----------18 | ||
正方形 パネル | ST-FB | 200200 | A | 10--------150 |
300300 | B | 10--------150 | ||
500500 | C | 10--------150 | ||
600600 | D | 10--------150 | ||
10001000 | E | 10--------150 | ||
Big panel | ST-DB | 10002000 | A | 10--------150 |
10003000 | B | 10--------120 | ||
15003000 | C | 10--------120 | ||
15004000 | D | 10--------100 | ||
20004000 | E | 10--------100 | ||
Rod | ST-BZ | ØX300 | A | Ø20------300 |
ØX500 | B | Ø20------300 | ||
ØX1000年 | C | Ø20------300 |
パラメータリスト の polyurethane panelのand rod
材料 | TDI、MDI、PPG、PTMG、MOCA等 |
色 | Natural transparent or as requested |
硬度 | 40- 90 (Shore A) |
密度 | 1.12-1.25g/cm3 |
Tensile Strength | 25-55Mpa |
Tear Strength | 85-155KN/M |
延長 | 450-650% |
Impact Elasticity | @&@20-30% |
許容 | 0. 1- 0. 3mm |
Working Temperature | 120°C (最高) |
Surface Finish | One side or b見通し外 |