| Size | 01 |
| Stream thread cutting device | Stream thread cutting device | Long line cutting |
| Bottom thread cutting device | Long line cutting |
| Main use | Men's clothing, casual clothing |
| Other use | Suit-dress, jeans trousers, trousers |
| Function | The cutting device will cut all thread heads to a great extent. May grasp the thread tails from a long distance more safely during the sewing process. Very suitable for precisely cutting thread heads of manual cutting. |
| Sewing shape | |
| Sewing length | Round-head eyehole8-42mm Straight button hole5-42mm |
| Press foot length (standard) | 30mm |
| Shim length (standard) | 22mm |
| Shim length (attachment) | 30mm |
| Sewing speed | 1.000- 2.500rpm |
| Needle code | 0.5-2.0mm |
| Zigzag sewing width | 1.5 5.0mm(In mechanical conditions, it is 4.0mm wide at most and the zigzag sewing width is 5.0 at most.) |
| Zigzag sewing width(factory-leaving setting) | 2.5mm |
| Length or fastened sewing of stream line | 0-20mm |
| Press foot height | Standard height is 12mm (may reach 16mm at highest) |
| Start-off made | Double pedal switch |
| Cloth-sending device | Intermittent cloth-sending of 3 pulse motors |
| Machine needle 4 | DO×558Nm80 -Nm120 |
| Machine needle (factory-leaving setting) *5 | DO×558Nm90 |
| Languages supported by operation board | English, Chinese |
| Safe setting | If there are any problems, the inner setting with urgent stop function and driven by safe circuit will automatically stop machine. |
| Upper shaft motor | AC servo motor 550W |
| Air pressure | Main regulator: 0.5Mpa Hammer-pressure regulator: 0.4Mpa |
| Air consumption volume | 43.2 liter/minute (8 cycles/minute) |
| Weight | Machine head: 120kg operation panel: 0.6kg Control box: 14.2-16.2kg |
| Power/power consumption | Single-phase: 100V/200V Three-phase: 200V/220V/380V/400V,400VA |
