原産地: | 中国(本土) | 銘柄: | xjk | モデル番号: | MSP6724 | 重量: | 0.095キログラム | サイズのパッキング: | 19センチ× 4センチ× 3センチ | 証明書: | ce、iso9001 | 保証: | 1年 | 最大出力: | 30ボルトac | メジャー範囲: | 50-5000 hz | 温度範囲: | -55 ℃〜105 ℃ | コイル抵抗: | 300オーム最大 | oem: | はい | instock: | はい |
包装
包装: | 梱包のサイズ: x4cmx3cm19センチメートル |
Speed Sensor MSP6724
1 year warranty.
payment ways: T/T or PayPal or Western unio.
for most kinds of product.
delivery within 1-5 days after payment /confirm/iation.
Dongguan XJK Tech. Co., Ltd.
Phone: 0086-769-81618126
My skype :annaaaron1
Magnetic Pickup MSP6724
DEscriptION
The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine. The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor the locknut. With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications.
The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit. The leads may needshielding if they are longer than 10 ft. (3m), or if external interference is present.
SPECIFIC DATA
Measure Range | 50-5000 Hz |
Inductance | 142MH+25% |
Thread Size | 5/8-18 UNF-2A |
Tap Drill Size | 37/64 inch |
Proximity to Gear Teeth | .028 in min. - .042 in max.(Approximately 1/2 to 3/4 |
Temperature Range | -55 °C to 105 °C |
Output at Cranking Speed | 1.5 volts AC minimum |
Maximum Output | 30 volts AC |
Coil Resistance | 300 ohms maximum |