製品情報
原産地: 中国(本土) | 銘柄: Dinter | モデル番号: DT-10 |
条件: 新しい | 装置容量: 45%-55% | 証明: セリウム, ISO, SGS |
提供される売り上げ後のサービス: 利用できるエンジニア機械類を海外に整備するため | Color: according to your demand | Capacity: 10T |
Cooling: circulating water cooling | Material of reactor: boiler steel | By-product: gasoline |
Fuel: coal wood gas | Raw material: waste tyre plastic rubber | Land required: 30m*8m |
Service: free to visit our factory | Thickness of reactor: 16mm |
包装
包装: one 40 fra-me for reactor & one 40 container,sometimes according to customers requirements |
PARAMETER
Items | Contents | ||
Raw material | Waste engine oil /plastic oil | ||
Structure form | Horizontal | ||
Model | DT-3T | DT-5T | DT-10T |
Size of reactor | D1500mm*L2500mm | D1500mm*L4000mm | D2000mm*L4000mm |
24-hour capacity | 3 tones | 5 tones | 10 tones |
Operating pressure | Constant pressure | ||
Heating material | Coal, charcoal, fuel gas, fuel oil | ||
Average out-put oil rate | 80%-90% | ||
Material of reactor | Q245R boiler plate | ||
Thickness of reactor | 16mm | ||
Rotate speed of reactor | 0.8 turn/minute | ||
Mode of cooling | Circulating Water cooling | ||
Working mode | Continuous feeding | ||
Delivery time | 20 days after receiving deposit | ||
Payment term | T/T, 30% in advance, balance paid before shipment |
usage of distillation machine
the distillation machine can turn waste oil(waste engine oil, waste tyre oil, waste plastic oil) into diesel ,the diesel you got from our distillation machine can be used directly in low speed engine like tractor ,road roller ,digging machine, diesel generator.and so on.
details of distillation machine
reactor
Reactor is full-covered, just a discharge port is outside
There is no necessary to dig into the ground for the foundation, shall reduce the quantities , dig deeper just for easy feeding
Reactor with two small imp0rts on the top, one is a feed imp0rt, another is to install safety valve.When you feed oil, you shall put the oil in through oil pump
Discharge port is not automatic slag, you can rake the slag out
There is a bigger hole on the top, 500 mm in diameter, the same as the slag discharge port. the hole is called manhole with a pressure gauge on it, convenient for people to enter the reactor, to maintain. In addition, when you feed oil, manhole is open, you can judge if the reactor is full or not.
We should guarantee that the manhole and slag discharge imp0rt is convective, otherwise people can't enter in
the working process of distillation machine
Process :
We put the waste oil into the reactor and heat it,when the temperature go to some degree,the oil gas will come into being.The oil gas will flow through the catslyst room and the pipe above the reactor into the first two condensor ,it will become the oil again, due to the positive pressure,the oil gas naturally flow into the third condensor,the first condensor share one tank,at the moment ,the oil we got is not pure, if you want to get more pure oil,you need to wash the oil.
You need to pump the oil from the two oil tank into the refining tank ,there are three refining tank,you had better wash the oil one by one ,because you shall put some different catalyst into the tank to make the oil more pure.
The first refining tank is to get rid of organic matter in oil. Because it is easy for organic matter to be oxidized. And the oil will turn black as a result of oxidation . After 30 mins’ rolling by air compressor, catalyst deposits.
The second refining tank is to get rid of the mineral dirt, keep acid alkali balance. After 30 mins’ rolling by air compressor, catalyst deposits.
Refining tank 3 is to decolor. Keep inner tank rolling through air pump, prevents depositing. When the oil is fully mixed with the catalyst, pump the mixture by the oil pump to vibration filter
. The vibration filter is to separate oil and catalyst, then discharge slag.
the 16th ,17th tank are decoloration tank. The two tanks are both for decoloration. Catalyst is on above , oil leakage. The process can go forward at the same time or one by one.
Advantages of our tire pyrolysis machine
Energy saving
1. Special design on burning system make fuel fully burned
2. Vacuum device speed up the oil leakaging
3. Waste flammable gas can be recycled to heat the reactor
Safety
1. Automatic welding both inner and outer
2. Equipping thermometer pressure gauge and alarm to guarantee safety
3. Water seal can prevent backfire and reduce corrosion
High work efficiency
1. Automatic feeding needs less labor force
2. The whole process need less time
3. Long lifespon
final product --- diesel
our company and customers
Henan Dinter Heavy Industry Machinery Co., Ltd. is a professional modern enterprise which specialized in manufacturing waste tires/plastics/oil refining machines, We have been engaged in manufacturing pyrolysis machine for 20 years including 10 years overseas market experience. We have three manufacturing plants, tens of independent & professional departments to serve global customers. Our company constantly implements advanced management, sales and technology, and learn the domestic and foreign management mode. We combine advanced foreign technology with independent research, we move forward continuously to higher level product quality and after-sales service.
Our products have obtained certificates of ISO9001:2000, ISO14001 and CE .
our service
1 we have Humanization design for you according to your situation
2 Warranty: The warranty period for reactor is 12months, and other part exclude spare parts are 12months. The problem caused by wrong operation of workers shall not be responsible by our company.
3 Installation and Training: Our company will send one technician for each set of machine for guiding your installation testing the machine and training your workers(if buyers need it).
contact me