原産地: | 中国(本土) | 色温度(CCT): | 2700-6500 | 銘柄: | ゆ | IPの評価: | IP65 | 光源: | 誘導ランプ | モデル番号: | YUA-SD * LJ02 | CRI (Ra>): | 85 | 入力電圧(V): | 110 | ランプの明るい効率(lm/w): | 78 | 認証: | FCC, CCC, RoHS, CE | 項目タイプ: | トンネルはつく | 働く寿命(時間): | 100000 | 働く温度(℃): | -30 - 50 | 電源: | 80-250ワット | 作業周波数: | 210 Khz | 形状: | 長方形 | 素材: | ダイカストアルミランプシェル | 取付高さ: | 4-8メートル | 品質保証: | 5年 |
包装
包装: | カートンによって外部と合板ケース、 泡によって内部。 標準出荷梱包 |
Materail:
1.Lamp body made by high pressure die-casting aluminum, long life and nice appearance.
2. Surface of die-casting aluminum electric box is coated by electrostatic wave, good heat sink effect and long life.
3.imported mirror face reflector, high reflectivity ensure high light luminous output.
4.High strength glass, high light transmission, shockproof.
5.New silicon rubber lock ring, ensure prefect tightness.
Applications:
It suiable for all kinds of building, billboards, square, airport, station, freight yard, tunnel, toll station, plstform, etc, wher is not easy for maintenance of light.
Features of XINYUAO Induction Lamp L
1. Long service life: up to 100,000hrs designed for free maintenance |
2. Over 50% energy saving compared to traditional HID lamps |
3. High luminous efficacy: 75-85 Lm/W |
4. Good color rendering: CRI > 80Ra |
5. Fast startup: instant ignition with hot restrike |
6. High power factor: > 0.99 |
7. No flicker: 100~300KHz high working frequency to deliver eye-friendly light |
8. Low luminous decay: less than 25% after 60,000hr ignition |
9. Wide color temperature range: 2700-6500K |
10. Constant power: less than 3% of change at ±10% voltage fluctuation |
11. THD < 10%: meet Class L of international standard |
amp:
Benefit of XINYUAO Induction Lamp Ballast:
1) Electronic circuits feature telecom power technology of BELL Laboratory |
2) Resistant to power surge, humidity, corrosion and dust |
3) Ultra-wide voltage range: 90V~320V |
4) Wider ambient temperature range: -30°C~+50°C |
5) PCB board: Component lines tidy and clean |
6) Open-circuit and short-circuit protection |
7) May repeatedly start up at unstable voltage |
8) Anti-lightning design of ballast to absorb instantaneous high voltage |
9) State-of-the-art frequency jittering technology ensures EMI/EMC compliance |
10) 70% of components imported from abroad to ensure less than 2‰ failure rate |