製品情報

包装

Fitec FS90 9g rc airplane servo motor

Feature

Micro Analog Servo 9g
Stall Torque:1.3kg.cm/18.09oz.in(4.8V)  

Dimensions:23.2 × 12.5 × 22 mm

Weight:9 g

Operating Speed :0.12sec/60degree (4.8V)

                                 0.10sec/60degree (6V)

Stall Torque :1.3kg.cm/18.09oz.in(4.8V)

Operating Voltage :4.8V~6V

 Control System :Analog

 Direction :CCW

 Operating Angle :120degree

 Required Pulse :900us-2100us

 Bearing Type :None

 Gear Type :Plastic

 Motor Type :me-tal

 Connector Wire Length :20 cm

FAQ

The 9g Continuous Rotation Micro Servo is the least expensive continuous rotation servo on the market and includes three types of servo horns. Use it to make a mini 2WD robot without the need for a motor controller!
 Need a tiny servo for a tiny task? Try the FS90 Micro Plastic Gear Servo! This servo is great for scanning type sensors, tiny robots, and more! Each servo comes with a variety of horns.

These servos use a standard PWM signal to control them. The Arduino does a great job of controlling PWM Servos, making it ideal for a variety of robotic projects. But sometimes powering these servos can be problematic. Powering servos from the Arduino's 5v regulator leads to underpowered servos, limited by both voltage and current. With other sensor systems, connecting a servo to an external power supply requires multiple cables or boards, defeating the purpose of a sensor shield. The RobotGeek Sensor Shield solves this problem with 2 jumpers to control the output voltage of the 6 PWM channels on the Arduino. Just move the jumper from '5V' to 'Vin' ans your servo will start to draw power from your Arduino's input voltage supply. Just plug in a 6v power supply into your Arduino, and you'll be able to power and control 6 RobotGeek Servos with no problem!

お取引の流れ→ (詳細を確認こちらをクリツク！)